. P E D E S T R I A N . P U S H . B U T T O N S
     
 

4 EVR Series 120
The 4 EVR series is an ADA compliant pedestrian push buttons designed to be virtually vandal proof.  The actuator is pressure sensitive and uses no screws or bolts, which can be bent or broken, in the functioning assembly.  An LED and audible tone are momentarily activated with the pedestrian call, latching LED is available with the enlightened module.  4 EVR cannot be stuck in a closed or constant call state.
Campbell Company Pedestrian Safety

• • •
  • • •
 

S Series 200, 400 & 500
These ADA compliant pedestrian push buttons are constructed with a plunger that is designed to have full travel.  This line of robust PPBs utilizes an all metal constructions to offer great value against direct abuse.  A passive linear bearing is utilized to reduce the coefficient of friction in the functional components.
Campbell Company Pedestrian Safety

• • •
  • • •
 

TM Solid State 700, 800 & 900
These ADA compliant pedestrian push buttons utilize the same piezo pressure sensitive switch as the 4 EVR series and therefore cannot be stuck in a closed on constant call.  The primary difference between this series and the 4 EVR is these do not have the LED call indication light.
Campbell Company Pedestrian Safety

• • •
  • • •
 

Advisor APS
Advisor Accessible Pedestrian Signals provide pedestrians with visual, tactile and audible information about the intersections crossing at the pedestrian station.  Advisor provides the necessary information to understand the status of the walk display.
Campbell Company Pedestrian Safety

• • •
 
• • •
 

Enlightened Push Buttons
All Campbell Company Pedestrian Pushbuttons are available with an “enlightened” display option.  Utilizing a super-bright LED machined into the housing, just above the stainless steel plunder, the use is given confirmation that the call has been sent to the controller.  The “enlightened” buttons operate using the existing pedestrian wiring this reducing installations costs.
Campbell Company Pedestrian Safety

• • •
 
• • •
 

Base Broadcast Unit APS
The BBU provides audible tone or message every time the Walk Display is active.  The BBU unit focuses the walk cycle signal message directly to the pedestrian crossing the initiation point, reducing the amount of noise affecting the community.  To limit the amount of equipment, the unit mounts inside of the existing ped housing.
Campbell Company Pedestrian Safety

• • •
  • • •
  Rectangular Rapid Flashing Beacons
Eltec

TOP OF PAGE