. L O O P . A M P L I F I E R S
   
 

LM 301 Series Shelf Mount Loop Monitor
The LM series of Loop Monitors from Eberle Design indicates vehicle presence and also monitors the condition of the loop for diagnostic purposes.  This Single channel monitor is available with a Delay and Extension timing feature (LM301t), as well as a Presence Retention Timing (LM301tx).  The LM301 series meet or exceeds all standards specified in NEMA publication TS 1-1989 part 15.
EDI - Eberle Design Inc.

• • •
  • • •
 

LM 302 Series Shelf Mount Loop Monitor
The LM series of Loop Monitors from Eberle Design indicates vehicle presence and also monitors the condition of the loop for diagnostic purposes.  This Two channel monitor is also available with a Delay and Extension timing feature (LM302t).  The LM302 series meet or exceeds all standards specified in NEMA publication TS 1-1989 part 15.
EDI - Eberle Design Inc.

• • •
  • • •
 

LM 304 Series Shelf Mount Loop Monitor
The LM series of Loop Monitors from Eberle Design indicates vehicle presence and also monitors the condition of the loop for diagnostic purposes.  This Four channel monitor has three operational modes and 15 sensitivity settings that can be set for each channel to suit various configurations.  The LM304 series meet and exceeds all standards specified in NEMA publication TS 1-1989 part 15.
EDI - Eberle Design Inc.

• • •
  • • •
 

LM 331t Series Shelf Mount Loop Monitor
The LM series of Loop Monitors from Eberle Design indicates vehicle presence and also monitors the condition of the loop for diagnostic purposes.  This Single Channel Loop Monitor features a Count, or Presence mode.  Presence is not conditioned by delay or extension timing.  The count output is designed to produce a single pulse, 125ms in duration, for each vehicle entering the loop.  The LM331t meets or exceeds all standards specified in NEMA publication TS 1-1989 part 15.
EDI - Eberle Design Inc.

• • •
 
• • •
 

LM 332t Series Shelf Mount Loop Monitor
The LM series of Loop Monitors from Eberle Design indicates vehicle presence and also monitors the condition of the loop for diagnostic purposes.  This Two Channel Loop Monitor features a Count, or Presence mode.  The count output is designed to produce a single pulse, 125ms in duration, for each vehicle entering the loop.  The LM332t has 15 sensitivity settings that can be set for each channel.  It meets or exceeds all standards specified in NEMA publication TS 1-1989 part 15.
EDI - Eberle Design Inc.

• • •
 
• • •
 

Oracle S1 Series Shelf Mount Loop Detector
The ORACLE series of programmable detectors indicates vehicle presence and incorporate a complete built-in loop analyzer for optimum detector set-up and diagnostic purposes.  Its LCD display can show a Loop Fault History Log with the last 25 loop fault conditions and power events.  The ORACLE /S1 Programmable Vehicle Detector meets or exceeds all standards specified in NEMA publication TS 2-1998 clause 6.5.
EDI - Eberle Design Inc.

• • •
 
• • •
 

Oracle S2 Series Shelf Mount Loop Detector
The ORACLE series of programmable detectors indicates vehicle presence and incorporate a complete built-in loop analyzer for optimum detector set-up and diagnostic purposes.  It is capable of 8 loop frequencies and can display a Loop Fault History Log with the last 25 loop fault conditions and power events.  The ORACLE /S2 Programmable Vehicle Detector meets or exceeds all standards specified in NEMA publication TS 2-1998 clause 6.5.
EDI - Eberle Design Inc.

• • •
  • • •
 

LM 602 Series Rack Mount Loop Monitor
The LM series of Loop Monitors from Eberle Design take vehicle detection one step further.  This two channel TS-1 monitor features four loop frequencies, three operational modes (modes dependent on model) and 15 sensitivity settings per channel.  The LM602 Series meets or exceeds all standards specified in NEMA publication TS 1-1989 part 15.
EDI - Eberle Design Inc.

• • •
  • • •
 

LM 602ST Series Rack Mount Loop Monitor
The LM 602-ST “Speed Trap” or “Traffic Calming” detector to use two loops spaced 16 feet apart to measure vehicle speed.  If the measure speed exceeds a switch selectable threshold, a pulse output is generated in the Channel 1 output.  Applications include traffic calking and advanced warning indications.  This two channel detector features four loop frequencies and has 15 sensitivity settings per channel.(dead link)
EDI - Eberle Design Inc.

• • •
  • • •
 

LM 604 Series Rack Mount Loop Monitor
The LM series of Loop Monitors from Eberle Design takes vehicle detection one step further.  This four channel TS-1 monitor features four loop frequencies, three optional and 15 sensitivity settings per channel.  The LM604 Series meets or exceeds all standards specified in NEMA publication TS 1-1989 part 15.
EDI - Eberle Design Inc.

• • •
  • • •
 

LM 612 Series Rack Mount Loop Monitor
The LM series of Loop Monitors from Eberle Design takes vehicle detection one step further.  This two channel TS-1 thumbwheel monitor features four loop frequencies, three operational modes (modes dependent on model) and 15 sensitivity settings per channel.  The LM612 Series meets or exceeds all standards specified in NEMA publication TS 1-1989 part 15.
EDI - Eberle Design Inc.

• • •
  • • •
 

LM 622 Series Rack Mount Loop Monitor
The LM series of Loop Monitors from Eberle Design take vehicle detection one step further.  This two channel TS-2 monitor features four loop frequencies, three operation modes and 15 sensitivity settings per channel.  The LM622 Series meet or exceeds all standards specified in NEMA publication TS 2-1992 section 6.5.
EDI - Eberle Design Inc.

• • •
  • • •
 

LM 624 Series Rack Mount Loop Monitor
The LM series of Loop Monitors from Eberle Design take vehicle detection one step further.  This four channel TS-2 monitor features four loop frequencies, three operation modes, timing and System/Count outputs, and 15 sensitivity settings per channel.  The LM624 Series meets or exceeds all standards in NEMA publication TS 2-1992 section 6.5.
EDI - Eberle Design Inc.

• • •
  • • •
 

LM 632t Series Rack Mount Loop Monitor
This two channel TS-1 monitor comes with Delay and Extension timing standard.  It also features four loop frequencies, three operational modes and 15 sensitivity settings per channel.  System Output via Separate Front Panel Connector as well as Relay Outputs are option (LM632tm).  The LM632t Series meets or exceeds all standards in NEMA publication TS 1-1989 part 15.
EDI - Eberle Design Inc.

• • •
  • • •
 

LM 642t Series Rack Mount Loop Monitor
This two channel TS-2 monitor comes with System/Count Outputs standard.  It also features four loop frequencies, three operational modes, timing and 15 sensitivity settings per channel.  The LM642 Series meets or exceeds all standards in NEMA publication TS 2-1992 part 6.5.
EDI - Eberle Design Inc.

• • •
  • • •
 

Oracle /2 Series Rack Mount Loop Detector
The ORACLE line of programmable detectors indicates vehicle presence and incorporates a complete built-in loop analyzer for optimum detector set-up and diagnostic purposes.  Its LCD display can show a Loop Fault History Log with the last 25 loop fault conditions and power events for each channel.  The ORACLE /2 Programmable Vehicle Detector meets or exceeds all standards in NEMA publication TS 2-1998 clause 6.5.
EDI - Eberle Design Inc.

• • •
  • • •
 

Oracle /4 Series Rack Mount Loop Detector
The ORACLE line of programmable detectors indicates vehicle presence and incorporates a complete built-in loop analyzer for optimum detector set-up and diagnostic purposes.  Its dual LCD display can show a Loop Fault History Log with the last 25 loop fault conditions and power events for each channel.  The ORACLE /4 Programmable Vehicle Detector meets or exceeds all standards specified in NEMA publication TS 2-1998 clause 6.5.
EDI - Eberle Design Inc.

• • •
  • • •
 

Model 710-TX/I Shelf Mount Loop Detector
The Naztec Model 710-TX/I Inductive Loop Detector uses state of the art technology to provide a robust and reliable stand-alone vehicle detection device.  Automatic self-tuning and twelve selectable sensitivity levels ensure trouble-free operation.  This Single Channel TS-1 Lop Monitor is capable of four operating modes: Pulse, Presence, Short Presence and Presence Timing.  The 710-TX/I meets or exceeds NEMA TS1 specifications for inductive loop detectors.
EDI - Eberle Design Inc.

• • •
  • • •
 

Model 722 Rack Mount Loop Detector
The Naztec Model 722 Inductive Loop Detector uses automatic self-tuning and twelve selectable sensitivity levels ensure trouble-free operation.  This Dual Channel TS-1 or TS-2 Loop Monitor is capable of three operating modes: Pulse, Presence and Presence Timing.  It is also available with a Short Presence option.  The 722 meets or exceeds NEMA TS1, TS2 and Caltrans specifications for inductive loop detectors.
EDI - Eberle Design Inc.

• • •
  • • •
 

Model 724 Rack Mount Loop Detector
tThe Naztec Mode; 724 Inductive Loop Detector uses state of the art technology to provide a robust and reliable stand-alone vehicle detection device.  Automatic self-tuning and twelve selectable sensitivity levels ensure trouble-free operation.  This Four Channel TS-1 or TS-2 Loop Monitor is capable of two operating modes: Pulse and Presence.  The 722 meets or exceeds NEMA TS1 and Caltrans specifications for inductive loop detectors.
EDI - Eberle Design Inc.

TOP OF PAGE