. F I B E R . O P T I C . C O M M U N I C A T I O N
   
 

Orion Fiber Optic Communication System
The Orion Fiber Optic Communication System provides a fully integrated, cost-efficient solution for the transport and management of video and date communications over a single-mode optical fiber network.  The Orion system is ideally suited for a communications network routed over a wide area to multiple locations.  It supports up to 11,880 video inputs and can actively monitor up to 128 real-time video outputs.
ComNet

• • •
  • • •
 

D1810 Bi-Directional Contact Closure Transceiver
The IFS D1810 transceiver provides one-way or bi-directional transmission of contact closure over one or two multimode optical fibers.  The transceiver has a contact input and a 0.5 amp contact output.  Plug-and-play design ensures easy installation.  The modules are available in either stand-alone or rack mount versions.
ComNet

• • •
  • • •
 

D2300 Series RS-485 Drop and Repeat Data Transceiver (2-Wire)
The IFS D2300 series data transceivers provide drop and repeat transmission of half-duplex (2-wire) EIA RS-485 data signals over one or two optical fibers.  The transceivers feature optical “drop & repeat” capability that allows the use to easily configure the network operation.  The transceivers are transparent to data encoding allowing for broad-range compatibility.  The D2300 series transceivers can be used as line-terminating devices with these modules.
ComNet

• • •
  • • •
 

D9100WDM Series Single Fiber RS-232 Drop & Retreat Data Transceiver
The IFS series D9100WDM consists of fully-digital single fiber transceiver for implementing simplex or full-duplex RS-232 drop-and-repeat respond traffic signalization/communications data networks utilizing one optical fiber.  The master-configured transceiver unit may be located anywhere within the network.
ComNet

• • •
  • • •
 

D19100SHR Series Self-Healing Ring/Full Duplex Data Transceiver
The IFS D19100SHR series self-healing ring transceiver unit is a fully-digital transceiver designed for implementing traffic signalization/communications data networks of the highest possible reliability.  Unlike competing products, the multiple-master capability of this series provides full protection against the possibility of a single pint of failure, significantly enhancing the reliability and availability of the network.
ComNet

• • •
  • • •
 

DT/DR1800 Series 8-Channel Contact Mapping Transmitters and Receivers
The IFS DT/DR1800 series transmitter and receiver provide transmission of up to eight contact closures over on optical fiber.  The modules use eight SPST reed delays and also incorporate a loss of carrier relay for alarm notification.  Models within this series are available for use with multimode or single-mode optical fiber.  Plug-and-play design ensures easy installation.
ComNet

• • •
  • • •
 

VDT/VDR14100WDM Digitally Encoded Video with Bi-Directional Data
The IFS VDT/VDR14100WDM series video transmitter/receiver and data transceiver supports simultaneous broadcast transmission of 10-bit digitally encoded video and bi-directional data over one multimode or single-mode optical fiber.  The modules are universally compatible with major CCTV camera manufacturers and support RS-232, RS-422 and 2-wire or 4-wire RS-485 data interfaces and all major data protocols.
ComNet

• • •
  • • •
 

VT/VR1530WDM Series FM Video with Return Data
The IFS VT/VR1530WDM series video and data transceiver/receiver supports the simultaneous transmission of frequency modulation (FM) video and return data over one optical fiber.  The modules are universally compatible with major CCTV camera manufacturers and support RS-232 and RS-422 data interfaces and all major data protocols.  Modules within the series are available for use with multimode or single-mode optical fiber.
ComNet

• • •
  • • •
 

VT/VR4930WDM FM Video with Bi-Directional Data
The IFS VT/VR4930WDM video transmitter/data transceiver and video receiver/data transceiver units utilize frequency modulation for high video transmission quality.  Completely transparent to and universally compatible with any NTSC, PAL or SECAM CCTV camera system, all standard pan-tilt-zoom control signals including RS-232, RS-422 and 2-wire RS-485 data are supported.
ComNet

• • •
  • • •
 

VT/VR7400-2DRDT Digitally Encoded Video/Bi-Directional Multiplexer
The IFS VT/VR7400-2DRDT video transmitter/data transceiver and video receiver/data transceiver series utilize state-of-the-art 8-bit digital encoding and decoding for high-quality video transmission that exceeds the requirements of EIA RS-250C for Medium-Haul Video Transmission.  Completely transparent to and universally compatible with any NTSC, PAL or SECAM CCTV camera system, data cannels can be set independently for RS-232, RS-422 and 2 or 4-wire RS-485 with tristate support.
ComNet

TOP OF PAGE